skip to Main Content

Quick Shot Pro

                  Introducing the Quickshot Pro CB Radio Interface.

  •  Derived from the Tried and True huge seller the “FX1 PRO”
  •  Interface cable with integrated keyer , audio input and Mic connector.
  •  Isolated audio circuit for smooth quiet operation on AM or SSB
  •  Makes interfacing to a Mixing board a snap.
  •  Extreme high quality build and parts

 Plug the 1/4″ phone plug into your mixing boards output.  Plug the Mic connector into your CB radio input.  Hand PTT for keying up.. Done!~

Now use any Microphone on your mixer (Dynamic Mics are recommended) but Condensers work too!

Currently made in 4 pin Cobra / Galaxy ONLY.

____________________________________________________________________________________________________________

The FX1 PRO !!!!

FX1 PRO JPG

Front panel (Above) Left to Right:   XLR Mic Input – 4 Pin CB Mic Input – Push To Talk Input (PTT)

——————————-

Standard hookup to a mixer with the FX1 PRO:

FX1 Hookup Standard

The white cable goes from send to Channel 1’s input    –  the grey cable goes from the main mix out to the FX1’s return jack.

FX1 PRO REAR !

  Mic cable to your radio – Audio Send – Audio Return.    Hooking it up is a snap!

————————————-

 Pro XLR Mic in – or – a Standard 4 pin Mic in

FX1-Pro -Psd Copy2

Connecting an effects processor

Hookup

 —————————————————————————————————————

Connect a Condenser Microphone to the FX1 PRO

connect-to-a-mixer

 

   1 audio cord to the return jack !  ….  (((( That was easy ))))

 >>>>Get your High quality Audio cable here: Hosa 3′ Audio Cables

Questions … Email me direct @ rikki2001@verizon.net

 ————————

This is a great product! Its plug and play simple. Lightning fast email responses. Rich sets the standard as to how all internet business should be done. Thanks Rich!

Bobby Central Florida

Visa Mastercard

———————-

Home

 

 

 

 

Back To Top